I keep answering the same questions in DMs, so here is the short version I give every new 2nd AC and every director who asks why we can't just zoom in. Corrections welcome. Focal length and faces - Perspective comes from where the camera stands. The focal length only decides how much of that view you keep. Put a 25mm close to a face and the nose grows and the ears shrink. Stand back at the distance an 85mm needs and the same face flattens and the background looms larger behind it. - Sensor size changes the field of view of a given lens. The width ratio between an Alexa Mini LF and Super 35 open gate is about 1.3, so a 50mm on LF frames like a 38mm on Super 35. Keep the camera distance the same and the perspective stays the same. Stops - An f-number is geometry: focal length divided by the entrance pupil. A T-stop is measured transmission through the actual glass. Expose with T-stops, which is why cine lenses are marked in T. Depth of field still follows the geometry. - ND density 0.3 is one stop. 0.6 is two, 0.9 is three, 1.2 is four, and so on. Heavy ND without infrared control lets far red through, so black fabric turns brown or magenta. Use IRND or full spectrum ND for anything past about 0.9. Anamorphic - A 2x squeeze was designed for an anamorphic film aperture of roughly 1.2:1, which unsqueezes to about 2.39:1. A 2x lens on a 16:9 sensor unsqueezes to about 3.56:1, so you crop the sides. A 1.3x or 1.33x lens on 16:9 lands close to 2.39:1 and uses the whole sensor. Shutter - 180 degrees means the exposure is half the frame interval: 1/48 s at 24 fps. - In a 50 Hz country, mains-driven lights can pulse at 1/48. Set 172.8 degrees at 24 fps, which is exactly 1/50 s. At 25 fps, 180 degrees already gives 1/50. Exposure tools - Learn one false color scale cold. On ARRI the green band sits on 18% grey, yellow warns you are just under clipping and red is clipped. The scale follows the EI you set, so change EI and the bands move with it. - The waveform tells you where everything sits at once. False color tells you what a single area is doing. Use both. Sources: - ARRI, lens mounts (PL and LPL), https://arri.com/en/learn-help/arri-camera-technology/lens-mounts-and-lds-2 - ARRI, ALEXA LF and anamorphic lenses white paper, https://100-assets.arri.de/arri_assets/lf_assets/downloads/en/ALEXA_LF_&_Anamorphic_Lenses_-_White_Paper.pdf - ARRI, FSND filters, https://arri.com/en/cine-lenses/lens-accessories/fsnd-filter
From the 1st AD chair, one thing to add on primes vs zooms: a prime change is quick on paper, but every swap on a heavy rig means rebalancing the head, maybe new follow focus gears, sometimes a new matte box back. On a tight day I would rather the DP carry one good zoom for the run-and-gun scenes and keep the primes for the set pieces. Tell me at the recce which scenes are which and I will schedule the lens changes as real time.
Actor side of the focal length point. A wide lens close to me feels intimate on set because the camera is right there, and then the dailies show a face I don't recognise. If the scene is a close-up on a wide lens, I want to know before the take, so I can keep my head still. Small movements read huge at that distance.
Small correction to my own habit, which this thread fixed: I used to ask for 'a longer lens' when I meant 'move the camera back'. Those are the same request only if you also accept the new perspective. Now I ask for a camera position first and let Nora pick the glass.