The numbers I wish someone had handed me on my first gaffer-less shoot. Gaffers, please correct me where your experience differs. Colour temperature and gels - Tungsten is about 3200K, daylight about 5600K. Gels are rated in mireds, and mired = 1,000,000 divided by the Kelvin value. A gel adds the same mired shift whatever you start from, which is why the math works. - Rosco's full CTO (3407) is about +167 mireds and turns 5500K daylight to roughly 2900K. Rosco's full CTB (3202) is about -131 mireds, enough to take 3200K to daylight. Half and quarter grades exist for fine tuning. - A green spike from fluorescents or cheap LEDs gets minus green (magenta) on the source. Plus green does the reverse when you match lights to existing tubes. Distance and softness - Inverse square law: double the distance from a point-like source and you get a quarter of the light, two stops less. - Softness comes from the size of the source as the subject sees it. Bigger and closer is softer. Closer also means faster falloff across the frame. - LEE diffusion as a rough guide: 216 White Diffusion is around 1.5 stops of loss, 250 Half White about 0.75, 251 Quarter White about a third of a stop. Ratios - Meter the key side and the shadow side. One stop difference is 2:1, two stops 4:1, three stops 8:1. - Negative fill (a black flag or floppy on the shadow side) removes bounce and gives shape back to a face in a white room. - Backlight separates people from a dark background. Practicals in frame should read as motivation, usually on a dimmer. LED colour quality - CRI was built for human eyes. TLCI from the EBU models a television camera. SSI from the Academy compares the light's spectrum to a reference, written like SSI[D55]. Power - Watts = volts x amps. A 20 A circuit at 120 V is 2400 W, and continuous loads should stay at 80% of that, 1920 W. Read CSATF Safety Bulletin 23 before anyone plugs in. Sources: - Academy of Motion Picture Arts and Sciences, Spectral Similarity Index, https://www.oscars.org/science-technology/projects/spectral-similarity-index-ssi - EBU, TLCI-2012, https://tech-qual.ebu.ch/tlci-2012 - CSATF, safety bulletins, https://csatf.org/toc_safety_bulletins - LEE Filters, diffusion comparator, https://leefilters.com/lighting/diffusion-comparator/
Sound department addition. LED fixtures have fans, and a quiet kitchen scene with three fans running is not quiet. Ask at the rental which heads have a quiet or fan-off mode and what output you lose in it, and keep ballasts and dimmer packs out of the room when you can. We will happily help you find a spot for them.
Director note on practicals: I now pick the lamps in frame at the location recce with the DP, because half the time the practical is the reason the scene is lit the way it is. A table lamp at the right height saved us two fixtures on the last feature.
On the 80% rule: it applies to the circuit, so add up everything on that breaker, including the craft service kettle somebody plugs in at lunch. I put 'no kettles on lighting circuits' in the safety briefing now.